For Years, electrical construction made easier thru innovative solutions and equipment’s. From manual, (which require brute strength), to Manual Hydraulics (which require a lot of work on setting and lifting because of equipment weight), electric ( these requires power source like power outlets) and now the world of electrical construction embraces the use of Battery Operated Tools.
The thing is, for every tool or equipment, there’s always what we called the ‘’TOP DOG”. The superior among of its kind. Now, how can we say that our electrical tool is at the TOP? Is it flexible for every application? Is it Heavy Duty? And How many applications can it perform?
Maxell Izumi, dedicated a lot of time and effort to meet its customers demand. To have that 1 tool that can perform a lot of electrical works. A tool that is innovative, heavy duty, and maximizes the use of its battery and hydraulic systems without compromising its output.
In 2018, Maxell Izumi Launches REC-6200mx, an electrical equipment that can perform not 1 but numerous applications. I said numerous because Maxell Izumi is not done yet on adding new applications for this equipment. It is equipped with 14.4V Lithium-Ion Battery which is fast charging and can perform for longer time. Now REC-6200mx battery relies not on time not being charge but on the amount of applications it has performed.
REC-6200mx originally can perform as follows:
- CABLE INDENT CRIMPER
- CABLE CUTTER
- REBAR CUTTER
- THREADED BAR CUTTER
- KNOCK-OUT PUNCHER
- ANGLE STEEL PUNCHER
- HEX COMPRESSION CRIMPER
- C-CONNECTOR CRIMPER
Let us look on Head Attachment one-by-one
CABLE INDENT CRIMPER
This Head Attachment comes with the equipment. It has a yoke nest and indent crimp dies.
CABLE CUTTER
From Indent Crimper, REC-6200mx can perform Cable Cutting with this Head Attachment.
REBAR CUTTER
Now, in addressing supports for panel boards and conduits and even for civil works, Maxell Izumi never fails to provide such Head Attachments. The next head Attachment can perform Rebar Cutting up to 16mm diameter.
THREADED BAR CUTTER
In supporting cable ladders, we need precise cutter for threaded rods, a cutter that doesn’t compromise the thread. This is the common problem in using hack saw in cutting threaded rods. After every cut you have to use grinder in order for the nuts to come thru to the rod. But with this Head Attachment, you can do this job in less than 10 seconds without compromising the thread.
KNOCK-OUT PUNCHER
Now for every electrical installation, protection and control is a must. We secure our circuit breakers with enclosures and panels. But, panels are punch with specific sizes of holes that corresponds with the size of conduits. This next Head Attachment is the response of Maxell Izumi.
Note: Punching Dies are sold separately.
ANGLE STEEL PUNCHER
Also, when we place or hang panel boards, electric practitioners use Angle Bars as support. Sometimes, depending on the design, some uses angle bars for cable ladders and conduits as replacement/addition to C-channels. Cutting angle bars are easy, but punching a hole is another story. In usual practice, drills are being used. from small drill bits up to the desired size (usually size of threaded rod for cable ladder cases and size of bolts when using angle bar for support for panels). With this Head Attachment, desired size of hole can be punch in less than 15 seconds. So you can imagine how much time is being saved. A great Investment indeed if you are in Electrical Construction Business.
HEX COMPRESSION CRIMPER
Although we have indent crimpers, some practitioners prefer Hex Compression Crimps. Maxell Izumi also provides solutions for this application. The next head Attachment can do Hex Compression Crimps.
C-CONNECTOR CRIMPER
For some applications, jobs may require C-Connectors, some can be purchase but some are just not in the design and budget. With these in mind, Maxell Izumi provides a solution. The next Head Attachment can perform C-Connector Crimps.
For inquiries reach us below:
Photos from Maxell Izumi
