BEST FOR LIMITED SPACE
- Fine tooth ratchet
- Link pin does not fall out
- Corrosion resistant finish
- Swivel Manifold Internal Relief Valve
- Low Weight, High Strength Design
- Superior Torsional Strength
- Fast Operation Cycle
- Floating Piston Design
- Auto-Connect Drive Piston
- Compact Frame Size
- Rigid Steel Body Construction
- Built-in Reaction Pad
- Small Nose Radius
- Tool Free Link Change
- Corrosion Resistant Finish
- Multi-Axis High Flow Swivel Manifold
- Simple Design
- Consistent Torque Output
- Powerthon™ Lifetime Warranty
The TWLC is a hydraulic ratchet-type torque tool for tightening nuts and bolts. It uses interchangeable drive heads to fit a variety of sizes. Reducers are offered with the drive heads to adapt to specific size nuts and bolts. It is powered with a 690 bar (10,000 psi) hydraulic pump unit; the torque output from the TWLC torque wrench is proportional to the pump pressure applied.
The TWLC Series Wrench was designed for the most inaccessible bolting areas found in the industry. Its long neck, short height and small radius have all added to its great success.
Model No | Unit | TWLC2 | TWLC4 | TWLC8 | TWLC15 | TWLC30 |
Hex Range | mm | 26-60 | 33-80 | 49-100 | 62-116 | 80-155 |
Minimum Torque | Nm | 256 | 646 | 1.293 | 2.415 | 4.683 |
Maximum Torque | Nm | 2.134 | 5.386 | 10.772 | 20.122 | 39.024 |
Weight | Kg | 1 | 2 | 3.5 | 7 | 14.5 |
A | mm | 97 | 120 | 147 | 174 | 223 |
B | mm | 103 | 130 | 158 | 186 | 239 |
C | mm | 128 | 159 | 177 | 200 | 267 |
D | mm | 8 | 9 | 24.5 | 27 | 26 |
E | mm | 35 | 43 | 40 | 43 | 62 |
F | mm | 13 | 13 | 14 | 14 | 15 |
G | mm | 32 | 42 | 54 | 63 | 82 |
H | mm | 42 | 52 | 67 | 76 | 94 |
SPX Bolting Systems offer a varied range of alternative and optional reaction accessories, which help to fi nd a reaction point solution no matter how unusual the bolted application is.
Reaction Arm Options
Reaction Bar (TWLC-RB)
- In-Line Extension Reaction Bar for TWLC wrench:
allows extended reach on the same plane - Pin engagement, no tools required
- Available for full range of tool sizes
Model | L1 (mm) | L2 (mm) | L3 (mm) | ||
TWLC2 | RB | 381 | 28 | 55 | |
TWLC4 | RB | 457 | 35 | 66 | |
TWLC8 | RB | 457 | 37 | 85 | |
TWLC15 | RB | 508 | 40 | 102 | |
TWLC30 | RB | 508 | 35 | 127 |
- Off-Set Reaction Arm for TWLC wrench:
allows off-set reaction within wrench profile - Pin engagement, no tools required
- Light alloy construction
- Available for full range of tool
Model | L1 (mm) | L2 (mm) | L3 (mm) | L4 (mm) | |
TWLC2 | RP | 84 | 35 | 142 | 13 |
TWLC4 | RP | 109 | 46 | 178 | 19 |
TWLC8 | RP | 136.5 | 57 | 220 | 26 |
TWLC15 | RP | 165 | 70 | 252 | 45 |
TWLC30 | RP | 200 | 86 | 317 | 44 |
For inquiries contact Hytec Power Inc. PH Distributor
If you would like to discuss these products further, or how they can benefit your application, then please do give us a call.
DOWNLOADS